Abstract




 
   

IJE TRANSACTIONS A: Basics Vol. 27, No. 1 (January 2014) 171-178   

downloaded Downloaded: 0   viewed Viewed: 1418

  LONG TERM ASSESSMENT OF FLEXURAL BEHAVIOR OF POLYESTER POLYMER CONCRETE (PC) IN DIFFERENT CHEMICALS
 
M. Jamshidi and M. J. Hashemi
 
( Received: January 14, 2015 – Accepted: June 11, 2015 )
 
 

Abstract    Polymer concrete (PC) is a composite material prepared by resin and aggregates. Advantages of polymer concretes include rapid curing at ambient temperatures, high flexural and compressive strengths, excellent chemical resistance and low permeability. In this research, a comparative study was performed on degradation of polyester resin concrete in different chemical solutions. Polymer concrete specimens were examined for flexural strength and flexural toughness after two and four months of exposure to the chemicals (i.e. sulfuric acid, sodium hydroxide, sodium sulfate, nitric acid, hydrochloric acid, citric acid, demineralized water, potable water, potassium hydroxide, gas oil). Results showed that the highest decrease in flexural strength (i.e. about 36%) was occurred in sodium hydroxide solution after two months of exposure. Comparing acid attack to the specimens it was found that citric acid as an organic acid, despite of higher pH, had the highest impact on flexural strength (i.e. about 21%). The flexural strength of PC specimens decreased considerablly in all chemicals (except in gas oil). There was not significant difference between two and four months of exposuring, therefore, the main degrading processes start during the first 60 days of exposuring.

 

Keywords    Polyester resin, polymer concrete, flexural strength, chemical aggressive

 

چکیده   

References   





International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir