IJE TRANSACTIONS C: Aspects Vol. 32, No. 3 (March 2019) 354-359   

downloaded Downloaded: 141   viewed Viewed: 481

B. Farokhi, M. Rezaei, Z. Kiamehr and S. M. Hosseini
( Received: December 04, 2018 – Accepted in Revised Form: March 07, 2019 )

Abstract    In this study, polyethersulfone based nanofiltration membranes were modified by air plasma generated through dielectric barrier discharge to increase the membrane hydrophilicity aiming to improve the separation and antifouling characteristics. The effect of plasma time on the physico-chemical and separation properties of membrane was investigated. The PES nanofiltration membranes were fabricated by the solution casting technique associated with phase inversion method. The FTIR spectra showed formation of imine and amine functional groups on the membrane surface. The water contact angle decreased form 58 ° to 31 ° by plasma treatment which produces more hydrophilic surface. SEM and SOM images demonstrated that the surface morphology was changed due to ions collision with membrane surface bombardment. AFM results indicated that membrane roughness was initially enhanced by plasma treatment up to 1 minute, and then decreased again by a further increase of treatment time. Membrane water flux increased from 10.05 (L/m2.h) to 35.17 (L/m2.h) remarkably by plasma treatment up to 1 minute and then decreased again at longer treatment times. An opposite trend was observed for the salt rejection of membranes. The water flux was enhanced ~270% for the modified membrane at 2 min plasma treatment whereas rejection declined less than 18%.


Keywords    Surface Modification; High Water Flux; Nanofiltration Membrane; Plasma Treatment; Physico-chemical Property



در اين پژوهش غشاهای نانو فيلتراسيون بر پايه پلي اتر سولفون با استفاده از پلاسمای هوا از طريق تخلیه سد دی ‌الکتریک و به منظور بهبود خاصيت آبدوستي غشا، خواص جداسازی و ضدگرفتگي مورد اصلاح قرار گرفت. اثر پلاسما بر خواص شيمي-فيزيکي و جداسازی غشاها مورد بررسي قرار گرفت. غشاها با استفاده از تکنيک قالب گيری محلول پليمری و تغيير فاز تهيه شد. نتايج طيف سنجي مادون قرمز تشکيل گروه های عاملي آمين و ايمين را بر سطح غشاها تاييد کرد. زاويه تماس آب در اثر اصلاح پلاسمايي از 58 تا 31 درجه کاهش يافت که نشان از بهبود آبدوستي سطحي غشاها بود. تصاوير ميکروسکوپ الکتروني و نوری تهيه شده از سطح غشاها نشان مي دهد که ساختار سطحي انها در اثر برخورد يونها تغييرات آشکاری داشته است. نتايج آناليز ميکروسکوپ اتمي حاکي از آن است که در ابتدا زبری سطح غشاها در اثر درمان پلاسمايي تا 1 دقيقه افزايش داشته و سپس با افزايش بيشتر زمان درمان پلاسمايي مجددا کاهش يافته است. همچنين ميزان فلاکس آب غشاها در ابتدا در اثر استفاده از درمان پلاسمايي تا 1 دقيقه از 05/10 (L/m2.h) تا 17/35 (L/m2.h) افزايش داشته و در ادامه با افزايش بيشتر ميزان زمان درمان پلاسمايي کاهش مي يابد. رفتار متفاوتي برای پس دهي ميزان نمک با درمان پلاسمايي مشاهده شد. در غشايي که به ميزان 2 دقيقه تحت درمان پلاسمايي قرار گرفته بود فلاکس آب به ميزان 270 درصد افزايش يافت درحاليکه ميزان پس دهي تنها 18 درصد کاهش داشت.


1. Bagheripour E., Hosseini S. M., Hamidi A. R., Moghadassi A.R., “Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite”, International Journal of Engineering, Transactions A: Basics, Vol. 30, No. 1, (2017) 7-14.
2. Moghadassi A. R., Bagheripour E., Hosseini S. M., Parvizian F., “Fabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance”, International Journal of Engineering, Transactions A: Basics, Vol. 31, No. 10, (2018) 1609-1616.
3. Steen M. L, Jordan A. C., Fisher E. R., “Hydrophilic modification of polymeric membranes by low temperature H2O plasma treatment”, Journal of Membrane Science, Vol . 204, No. 1 (2002) 341-357.
4. Hosseini S. M., Amini S. H., Khodabakhshi A. R., Bagheripour E., Van der Bruggen B., “Activated carbon nanoparticles entrapped mixed matrix polyethersulfone based nanofiltration membrane for sulfate and copper removal from water”, Journal of the Taiwan Institute of Chemical Engineers, Vol. 82, (2018) 169-178.
5. Bagheripour E., Moghadassi A. R, Hosseini S. M., “Preparation of Polyvinylchloride Nanofiltration Membrane: Investigation the Effect of Thickness, Prior Evaporation Time and Addition Polyethylene glycol as Additive on Membrane Performance and Properties”, International Journal of Engineering, Transactions C: Aspects, Vol. 29, No. 3 (2016) 280-287.
6. Rushton A., Ward A. S., Holdich R. G., “Solid-liquid filtration and separation technology”, John Wiley & Sons, VCH (2008).
7. Bagheripour E., Moghadassi A. R., Hosseini S. M., “Incorporated Poly Acrylic Acid-co-Fe3O4 Nanoparticles Mixed Matrix Polyethersulfone based Nanofiltration Membrane in Desalination Process”, International Journal of Engineering, Transactions C: Aspects, Vol. 30, No. 6, (2017) 821-829.
8. Zhao C., Xue J., Ran F., Sun S., “Modification of Polyethersulfone Membranes- A Review of Methods”, Progress in Materials Science, Vol. 58 (2013) 76-150. 
9. Luo M. L., Zhao J. Q., Tang W., Pu C. S., “Hydrophilic modification of poly(ethersulfone) ultrafiltration membrane surface by self assembly of TiO2 nanoparticles”, Applied Surface Science, Vol. 249 (2005) 76-84.
10. Khulbe K. C., Feng C., Matsuura T., “The Art of Surface Modification of Synthetic Polymeric Membranes”, Journal of Applied Polymer Science, Vol. 115 (2010) 855-895.
11. Vidalis I., “Surface hydrophilic modification of RO membranes by plasma polymerization for low organic fouling”, TU Delft, Delft University of Technology, (2010).
12. Wavhal D. S., Fisher E. R., “Membrane surface modification by plasma-induced polymerization of acryl amide for improved surface properties and reduced protein fouling”, Langmuir, Vol. 7, No. 19, (2003) 79-85.
13. Liu Z. M., Xu Z. K., Wan L. S., Wu J., Ulbricht M., “Surface modification of polypropylene microfiltration membranes by the immobilization of poly (N-vinyl-2-pyrrolidone): a facile plasma approach”, Journal of Membrane Science, Vol. 249, (2005) 21-31.
14. Wavhal D. S., Fisher E. R., “Modification of polysulfone ultrafiltration membranes by CO2 plasma treatment”, Desalination, Vol. 172, (2005) 189-205.
15. Pal S., Ghataka S. K., Deb S., Das Gupta S., “Characterization of CO2 plasma treated polymeric membranes and quantification of flux enhancement”, Journal of Membrane Science, Vol. 323 (2008) 1–10.
16. Tsai C. Y., , Chang Y. C., Huang C., “Surface Hydrophilization of Polysulfone Membrane by Cyclonic Atmospheric Pressure Plasma”, Osaka University, (2011).
17. Moghimifar V., Raisi A., Aroujalian A., “Surface modification of polyethersulfone ultrafiltration membranes by corona plasma-assisted coating TiO2 nanoparticles”, Journal of Membrane Science, Vol. 461, (2014) 69-80.
18. Sadeghi I., Aroujalian A., Raisi A., Dabir B., M. Fathizadeh, “Surface modification of polyethersulfone ultrafiltration membranes by corona air plasma for separation of oil/water emulsions”, Journal of Membrane Science, Vol. 430 (2013) 24-36.
19. Han R., Zhang S., Liu C., Wang Y., Jian X., “Effect of NaA zeolite particle addition on poly (phthalazinone ether sulfone ketone) composite ultrafiltration (UF) membrane performance”, Journal of Membrane Science, Vol. 345, No. 1, (2009) 3455-3462.
20. Lee H. S., Im S. J., Kim J. H., Kim H. J., Kim J. P., Min B. R., “Polyamide thin-film NF membranes containing TiO2 nanoparticles”, Desalination, Vol. 219 (2008) 48-56.
21. Hegde C., Isloor A. M., Padaki M., Fun H. K., “Synthesis and performance characterization of PS-PPEES nanoporous membranes with nonwoven porous support”, Arabian Journal of Chemistry, Vol. 6, (2013) 319-326. 

International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir