IJE TRANSACTIONS B: Applications Vol. 32, No. 5 (May 2019) 794-798   

downloaded Downloaded: 34   viewed Viewed: 325

V. Morenov and E. Leusheva
( Received: January 16, 2019 – Accepted in Revised Form: May 02, 2019 )

Abstract    Filtration of the drilling mud is one of it's most important parameters, especially when drilling-in producing formation. Decrease of filtration characteristics allows reducing both solid and liquid phases's penetration zone into the formation. The study of the effect of the weighting-bridging agent's fractional composition on the filtration rate allows selecting of optimal composition of the solid phase in the the drilling mud. This paper presents studies of the static filtration rate of drilling mud with addition of various weighting-bridging agents. The obtained result indicates that an intensive decrease in the filtration rate is observed at calcium carbonate's introduction into the solution with an average particle size of up to 50 μm. Further studies should be directed to investigate the dynamic filtration rate, the possibility of "mixing" of various fractions in the composition of one solution and the evaluation of their influence on the filtration rate.


Keywords    Filtration Rate; Weighting Agent; Drilling Mud; Bridging Agent



فیلتراسیون سیال حفاری به عنوان یکی از مهم ترین پارامتر های آن به ویژه در حفاری لایه های تولیدی به حساب می رود. کاهش خواص فیلتری، امکان کاهش منطقه نفوذ فاز های جامد و مایع سیال حفاری به دورن لایه را فراهم می آورد. مطالعه تاثیر ترکیب بخشی عامل وزنی بر شاخص فیلتراسیون، امکان انتخاب ترکیب بهینه فاز جامد در ترکیب سیال حفاری را فراهم می آورد. نتایج به دست آمده گواه بر این هستند که اضافه کردن کلسیم کربنات با با سایز میانگین ذرات تا 50 میکرومتر منجر به کاهش شدید شاخص فیلتراسیون می گردد. پژوهش های بعدی باید در جهت مطالعه شاخص دینامیک فیلتراسیون، مطالعه امکان ترکیب بخش های مختلف در یک سیال حفاری و ارزیابی تاثیر آن ها بر شاخص فیلتراسیون باشند.


1. Abrams, A., "Mud design to minimize rock impairment due to particle invasion", Journal of Petroleum Technology,  Vol. 29, No. 05, (1977), 586-592.
2. Kaeuffer, M., "Determination de l’optimum de remplissage granulometrique et quelques proprietes s’y rattachant", in Congres de I’AFTPV, Rouen., (1973).
3. Vickers, S., Cowie, M., Jones, T. and Twynam, A.J., "A new methodology that surpasses current bridging theories to efficiently seal a varied pore throat distribution as found in natural reservoir formations", Wiertnictwo, Nafta, Gaz,  Vol. 23, No. 1, (2006), 501-515.
4. Ishbaev, G., Dilmiev, М., Khristenko, А. and Mileyko, А., "Bridging theories of particle size distribution", Бурение и нефть,  No. 6, (2011), 16-18.
5. Dick, M., Heinz, T., Svoboda, C. and Aston, M., "Optimizing the selection of bridging particles for reservoir drilling fluids", in SPE international symposium on formation damage control, Society of Petroleum Engineers., (2000).
6. Lamb, K.F., Harper, B.F., Ali, S.A., Darring, M.T., Marine, H.C. and Foxenberg, W.E., "Fluid-loss pills control losses through sand-control screens without damage or cleanup treatment", in Asia Pacific Oil and Gas Conference and Exhibition, Society of Petroleum Engineers., (2007).
7. Ya., M., S., G., A., I., I., E., A., L. and A., K., "Marcs engineer software predicting tight packing of lost circulation materials for drilling fluids", in Drilling and Oil., (2014), 35-37 
8. I.R., R. and A.M., S., "The results of the complex rheological studies of the cross-linked polymer composition for the limitation of water inflow to carbonate reservoir conditions", International Journal of Civil Engineering and Technology,  No. 2, (2019), 493-509.
9. Moradi, S.T. and Nikolaev, N.I., "Considerations of well cementing materials in high-pressure, high-temperature conditions", International Journal of Engineering, Transactions C: Aspects,  Vol. 29, No. 9, (2016), 1214-1218.
10. Morenov, V. and Leusheva, E., "Energy delivery at oil and gas wells construction in regions with harsh climate", International Journal of Engineering-Transactions B: Applications,  Vol. 29, No. 2, (2016), 274-279.
11. Moradi, S.T. and Nikolaev, N., "Optimization of cement spacer rheology model using genetic algorithm", International Journal of Engineering Trans. A Basics,  Vol. 29, No. 1, (2016), 127-131.
12. Standardization, I.O.f., "Petroleum and natural gas industries--drilling fluid materials: Specifications and tests, ISO,  (2008).
13. Beloglazov, I., "Automation experimental studies of grinding process in jaw crusher using dem simulation", in Journal of Physics: Conference Series, IOP Publishing. Vol. 1118, (2018), 012007.
14. Okoro, E.E., Igwilo, K.C., Ifeka, K., Okafor, I.S. and Sangotade, I., "Cellulosic cyperus esculentus l. As a filtrate loss modifier in field applicable aqueous and non-aqueous drilling fluids", Journal of Petroleum Exploration and Production Technology,  (2018), 1-7.
15. Huo, J.-h., Peng, Z.-g., Ye, Z.-b., Feng, Q., Zheng, Y., Zhang, J. and Liu, X., "Investigation of synthesized polymer on the rheological and filtration performance of water-based drilling fluid system", Journal of Petroleum Science and Engineering,  Vol. 165, (2018), 655-663.
16. Mohamadian, N., Ghorbani, H., Wood, D.A. and Khoshmardan, M.A., "A hybrid nanocomposite of poly (styrene-methyl methacrylate-acrylic acid)/clay as a novel rheology-improvement additive for drilling fluids", Journal of Polymer Research,  Vol. 26, No. 2, (2019), doi.org/10.1007/s10965-019-1696-6.
17. Balavi, H. and Boluk, Y., "Dynamic filtration of drilling fluids and fluid loss under axially rotating crossflow filtration", Journal of Petroleum Science and Engineering,  Vol. 163, (2018), 611-615.
18. Alshubbar, G., Nygaard, R. and Jeennakorn, M., "The effect of wellbore circulation on building an lcm bridge at the fracture aperture", Journal of Petroleum Science and Engineering,  Vol. 165, (2018), 550-556.
19. Morenov, V., Leusheva, E. and Martel, A., "Investigation of the fractional composition effect of the carbonate weighting agents on the rheology of the clayless drilling mud", International Journal of Engineering,  Vol. 31, No. 7, (2018), 1152-1158.
20. Moradi, S.T. and Nikolaev, N.I., "Sedimentation stability of oil well cements in directional wells", International Journal of Engineering-Transactions A: Basics,  Vol. 30, No. 7, (2017), 1105-1109.
21. Morenov, V. and Leusheva, E., "Development of drilling mud solution for drilling in hard rocks", International Journal of Engineering, Transactions A: Basics,  Vol. 30, No. 4, (2017) 620-626.
22. Nikolaev, N. and Leusheva, E., "Development of drilling fluids composition for efficiency increase of hard rocks drilling", Journal of Mining Institute,  Vol. 219, (2016), 412-420.
23. Moradi, S.T., Nikolaev, N. and Leusheva, E., "Improvement of cement properties using a single multi-functional polymer", International Journal of Engineering,  Vol. 31, No. 1, (2018), 181-187.
24. Nikolaev, N.I. and Haoya, L., "Results of cement-to-rock contact study", Записки Горного института,  Vol. 226, No., (2017), 428-434. DOI: 10.25515/PMI.2017.4.428

International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir